Okuma LS-450 Engine Lathe.
Has a digital read out, taper attachment, a tail stock that uses 4mt, coolant ready, a 13″ 3 jaw chuck, and a 12″ 4 jaw chuck.
Swing over the bed is 17 – 11/16″
Swing over the cross slide is 9 – 13/32″
Distance between centers is 49 – 1/4″
Spind Nose is an A-1-6
Speeds range from 35 – 1800 RPM
Spindle diameter is 2 – 9/16″
Bed width is 15 – 3/8″
10 HP Motor is 3 phase 220 or 440 V
Weight is approximately 5800 lbs.
Under power for those of you who want to inspect.